HONEYWELL VC6013 SERIES ACTUATOR C/W VALVE
HONEYWELL VC6013 SERIES ACTUATOR C/W VALVE Honeywell Parts, Components and Accessories Subang Jaya, Selangor, Kuala Lumpur (KL), Malaysia. Supplier, Supplies, Manufacturer, Wholesaler | Culmi Air-Cond & Refrigeration Parts Supply Sdn Bhd

HONEYWELL VC SERIES BALANCED HYDRONIC VALVES 2--WAY AND 3--WAY

Non-Spring Return Type

For both types of actuator a power failure will leave the valve at the position it was interrupted. When power is restored, the valve will respond to controller demand.

Type (Complete Set)


HONEYWELL VC6013AP1000T ACTUATOR (3-WIRE/200-240V 50/60HZ) C/W 2-WAY 1'' BSPP (INT. THD) VALVE * Discontinued!
HONEYWELL VC6013AJ1000T ACTUATOR (3-WIRE/200-240V 50/60HZ) C/W 2-WAY 3/4'' BSPP (INT. THD) VALVE * Discontinued!
HONEYWELL VC6013ZND6100 ACTUATOR (3-WIRE/200-240V 50/60HZ) C/W 3-WAY 1-1/4'' BSPP (INT. THD) VALVE

Replaced Model


HONEYWELL VN6013ZZ ACTUATOR (3-WIRE/200-240V 50/60HZ)

Replacement Model

HONEYWELL VC4013AP1000T ACTUATOR (2-WIRE+COM./200-240V 50/60HZ) C/W 2-WAY 1'' BSPP VALVE
 

Type (Just Actuator)

HONEYWELL VC6013ZZ00 ACTUATOR (3-WIRE/200-240V 50/60HZ) * EQUIVALENT
 TO VN6013ZZ!

Type (Just Valve)

HONEYWELL VCZAJ1000 3/4'' 2-WAY (BSPP-INT. THD) VALVE ONLY
HONEYWELL VCZAP1000 1'' 2-WAY (BSPP-INT. THD) VALVE ONLY
HONEYWELL VCZBD1100/U 1-1/4'' 2-WAY (NPT-INT. THD) HYDRONIC VALVE ONLY 
HONEYWELL VCZND6100/U 1-1/4'' 3-WAY (NPT-INT. THD) HYDRONIC VALVE ONLY 
 

APPLICATION

The VC series balanced hydronic valves allow greater control of hot and/or cold water flow.
The VC series balanced hydronic valves are designed for both domestic boiler heating and domestic cooling applications.

DESCRIPTION


The VC series 2--position hydronic valves are used in domestic and small commercial applications to control the flow of hot and/or cold water. They consist of an actuator, valve and a cartridge assembly.
 
2--way valves are designed for ON--OFF ”zone” control of domestic systems.
 
3--way valves can be piped for either diverting or mixing valve applications in domestic central heating and/or cooling systems. Both versions can be used to control individual fan coil, baseboard radiator or convector applications.
 
Depending on the model selected they can be controlled by a low or line voltage SPST or SPDT controller, such as a room thermostat, aquastat or flow switch.

The VC series hydronic valves are designed to take avantage of sinusoidal valve actuator travel and therefore operate silently and without water hammer.

Through internal logic the actuator only takes power while driving the valve to the commanded position.

 
The actuator head is removable without affecting the integrity of the water system. All actuator versions are interchangeable with any valve body, offering the highest flexibility for boiler production line assembly and maintenance.
 
The valve piston construction allows for port sealing that is independent of the differential pressure across the valve.
 
Flow through the 2--way valve can be in either direction, so the ports are not designated.
 
3--way valves are suitable for both diverting water from AB to A or to B and from A or B to AB.

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version