CULMI MFP-86CC (28 L/MIN) 2-IN-1 VACUUM & PRESSURE TEST PUMP (220V/50HZ)
CULMI MFP-86CC (28 L/MIN) 2-IN-1 VACUUM & PRESSURE TEST PUMP (220V/50HZ) CULMI Vacuum Pump Subang Jaya, Selangor, Kuala Lumpur (KL), Malaysia. Supplier, Supplies, Manufacturer, Wholesaler | Culmi Air-Cond & Refrigeration Parts Supply Sdn Bhd

CULMI MFP 86CC 28 L:MIN 2 IN 1 VACUUM & PRESSURE PUMP OPERATIONCULMI MFP 86CC 28 L:MIN 2 IN 1 VACUUM & PRESSURE PUMP OPERATIONCULMI MFP 86CC 28 L:MIN 2 IN 1 VACUUM & PRESSURE PUMP OPERATIONCULMI MFP 86CC 28 L:MIN 2 IN 1 VACUUM & PRESSURE PUMP OPERATIONCULMI MFP 86CC 28 L:MIN 2 IN 1 VACUUM & PRESSURE PUMP OPERATIONCULMI MFP 86CC (28 L/MIN) 2 IN 1 (OIL REPLACEMENT PROCESS)CULMI MFP 86CC (28 L/MIN) 2 IN 1 (PRESSURE TEST OPERATION)

CULMI MFP-86CC (28 L/MIN) 2-IN-1 VACUUM & PRESSURE TEST PUMP (220V/50HZ) = RM540.00 PER UNIT (10-6-2022-AA20.3)

TECHNOLOGY ORIGINALLY FROM ITALY

Pressure Test With PSI Unit

With Safety Valve Active Pressure 320 PSI (2.63Mpa). Without Safety Valve Can Achieve Beyond The Pressure In PSI For Pipe Pressure Test and Hold Test For Leak Inspection And Make Sure All The Connected Parts Can Bear The Pressure.

Note

For Automotive Pressure Test, 2mins Can Achieve 300 PSI.

Vaccum Test

28L/Min Or 0.99 CFM

Oil Type & Change Frequency

SUN OIL PSO100 (1L) POE Oil (R410A/R22/R134A/R407C)

Inside the pump filled with 32# 300ml refrigeration oil, do not add more or port-out. Replenish the pump with 50~80ml when the working hour over 50 hours (Fill oil directly from Suction Port).


Maintenance After Use

Seal the suction port with sealing cap. Switch on the pump and about 20~30 seconds, when there is no air discharge, put on the sealing cap to the discharge port.



Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version