TPI-100 EZ Digital Multimeter
TPI Model 100 Auto Ranging Digital MultimeterTPI Model 100 EZ Digital Multimeter
TPI-100 EZ Digital Multimeter
The new TPI 100 automatically switches between AC and DC Voltage as well as resistance measurements. No more guessing
what range to switch your meter to. The TPI 100 does it automatically.
Features
Features
- EZ to use one button operation
- Automatically Measures DC Volts, AC Volts, and Ohms (Resistance)
- Large 4,000 Count Display
- 0 to 600 Volts AC and DC
- 10M Ohm impedance
- Auto Power Off After 10 Minutes
- Includes Test Lead Set, Batteries, and Protective Rubber Boot
Model 100 Specifications | ||
---|---|---|
DC Volts |
Maximum Input: 600V (Minimum Input = 1.5V)
Maximum Resolution: 0.001V Accuracy: +/-0.5% |
|
AC Volts |
Maximum Input: 600V (Minimum Input = 1.7V)
Maximum Resolution: 0.1V Accuracy: +/-0.8% |
|
DC Amps | N/A | |
AC Amps | N/A | |
Resistance (Ohms) |
Maximum Input: 40MΩ
Maximum Resolution: 0.1Ω Accuracy: +/-0.8% |
|
Frequency | N/A | |
Capacitance | N/A | |
Inductance | N/A | |
Temperature
(K-Type Thermocouple) |
N/A | |
Continuity | Audible at less than 100Ω | |
Diode | N/A | |
Duty Cycle | N/A | |
True RMS Responding | No | |
Conductance | No | |
Pulse Width | No | |
Data Hold | No | |
Min/Max Record | No | |
Time Stamp Logging | No | |
Relative Mode | No | |
Compare Mode | No | |
RS-232 Output | No | |
Process Loop Output | No | |
Sleep Mode / Auto Off | No | |
Protective Boot | Yes (standard) | |
Display Type | 4000 count LCD | |
Range Selection | Auto including function selection | |
Operating Temperature | 32°F to 104°F (0°C to 40°C) | |
Storage Temperature | 14°F to 122°F (-10°C to 50°C) | |
Humidity | 80% non-condensing | |
Size | 6” x 3.1” x 1.2” (187mm x 86mm x 33mm) with boot | |
Weight | 12oz (340g) with boot | |
Battery Type | 1.5V “AA” Alkaline (2) | |
Battery Life | 500hrs Typical | |
OverInput Category | CAT III 600V | |
Agency Approval | IEC 61010-1 | |
Warranty | 3 Years |