M6284D1000 24V 50/60HZ Modutrol IV™ Motors
M6284D1000 24V 50/60HZ Modutrol IV™ Motors
Dated : 23-9-2021
APPLICATION
These Modutrol® Motors are 3-wire floating control motors
with an internal, electrically isolated feedback potentiometer.
These motors are used with controllers that provide floating
or spdt output to operate dampers or valves.
FEATURES
• Replace M944B,E,G,S Motors.
• Oil immersed motor and gear train for reliable performance and long life.
• Wiring box provides NEMA 3 weather protection.
• Quick-connect terminals standard—screw terminal adapter available.
• Adapter bracket for matching shaft height of older motors is standard with replacement motors.
• Die-cast aluminum housing.
• Integral auxiliary switches are available factory mounted or can be field added to TRADELINE® models.
• Electrically isolated feedback potentiometer provides indication of shaft position and can be used to slave Series 90 Motors or rebalance an external control circuit.
Product Specifications
-
Application
-
Electric
-
Dimensions (in.)
-
6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in. deep
-
Dimensions (mm)
-
164 mm high x 140 mm wide x 185 mm deep
-
Includes
-
Slave with Series 90 Motors
-
Weight (lb)
-
6.5 lb
-
Comments
-
non-linear feedback, for slaving applications only
-
Item Type
-
Product
-
Mounting
-
Foot-mounted
-
Frequency
-
50 Hz; 60 Hz
-
Approvals, Underwriters Laboratories Inc.
-
Listed: File No. E4436, Guide No. XAPX for USA and Canada
-
Tradeline Value
-
Tradeline
-
Electrical Connections
-
Quick-connect terminals
-
Supply Voltage
-
24V
-
Power Consumption
-
Driving-- 15 VA
-
Approvals, CE
-
EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)
-
Ambient Temperature Range (F)
-
-40 F to +150 F
-
Ambient Temperature Range (C)
-
-40 C to +60 C
-
Internal Auxiliary Switch
-
0
-
Auxiliary Switch Ratings
-
AFL - 120 Vac-- 7.2A; ALR- 120 Vac-- 43.2A; AFL - 240 Vac-- 3.6A; ALR- 240 Vac-- 21.6A
-
Stroke
-
Adjustable; 90 to 160 degrees, Symmetrical
-
Shaft Dimensions (in.)
-
0.375 in. Square
-
Control Signal
-
Floating
-
Fail Safe Mode
-
Non-Spring Return
-
Torque Rating (lb-in.)
-
150 lb-in.
-
Torque Rating (Nm)
-
17 Nm
-
External Auxiliary Switches Available
-
Yes
-
Shaft Rotation (upon control signal increase)
-
Dependent on wiring (normally closed)
-
Factory Stroke Setting
-
160 degrees
-
Timing, Nominal
-
30-60 sec
-
Feedback
-
Yes
-
Shaft Dimensions (mm)
-
10 mm Square
-
Motor shafts
-
Dual-ended shaft
-
Deadweight Load on Shaft
-
Either End-- 200 lbs.; Combined on both Shafts-- 300 lbs.
-
Internal Transformer
-
None