HONEYWELL M7410E SMALL MODULATING LINEAR VALVE ACTUATOR (24 VAC)
Download Files
HONEYWELL_M7410E_SMALL_MODULATING_LINEAR_VALVE_ACTUATOR_24VAC_(MANUAL).pdf (100.67 KB)
HONEYWELL_M7410E_SMALL_MODULATING_LINEAR_VALVE_ACTUATOR_24VAC.pdf (251.15 KB)
HONEYWELL_M7410E_SMALL_MODULATING_LINEAR_VALVE_ACTUATOR_24VAC_(MANUAL).pdf (100.67 KB) HONEYWELL_M7410E_SMALL_MODULATING_LINEAR_VALVE_ACTUATOR_24VAC.pdf (251.15 KB)
HONEYWELL M7410E SMALL MODULATING LINEAR VALVE ACTUATOR (24 VAC)
Model
Model
HONEYWELL M7410E1002 SMALL MODULATING LINEAR VALVE ACTUATOR (24 VAC/50/60 HZ)
HONEYWELL M7410E1028 SMALL MODULATING LINEAR VALVE ACTUATOR (24 VAC/50/60 HZ)
APPLICATION
The Honeywell M7410E actuator is specifically designed to provide modulating control together with the V5822/23,
V5832/33, and V5825B series of small linear valves.
The M7410E is used in fan-coil-units, induction units, small reheaters and recoolers, and for zone control applications. It is employed in electronic temperature control systems with hot and/or cold water as the controlled medium. This actuator is fully compatible with all controllers providing 0...10 V or 2...10 V output signals.
The 7410E actuator is designed for applications where space is limited and minimum power consumption is required. A microprocessor-based, high-performance positioner guarantees accurate control. Reliable longtime operation is ensured due to the fact that no mechanical feedback potentiometer and no mechanical endswitches are needed. Due to an automatic synchronization function, the close-off point is self-adjusting. Based on a running time of 150 s, valve positioning and flow adjustment is very exact. Manual positioning is provided for all actuators. The actuator is both attractive and robust in design. A special version with auxiliary switch is available.
FEATURES
Microprocessor-based positioner ensures precise stem positioning
Small size allows installation where space is limited
Low power consumption
Suitable for 0...10 V and 2...10 V controller output signal (adjustable on site)
Easy-to-operate direct/reverse acting switch
Simple input signal override (e.g. for frost protection function)
Reliable longtime operation because mechanical feedback potentiometers and mechanical end switches are not required
Magnetic coupling for stem force limitation and selfadjustment of the close-of-point
Supplied with pre-wired connection cable
Simple, standardized valve/actuator coupling. No tools required for mounting
Visual valve position indicator furnished with actuator
Manual operation provided by the valve adjustment cap, extra knob, or with a hexagon key
