SUNISO SONOCO 3/4/5 GS and SL32S/68S
SUNISO SONOCO 3/4/5 GS and SL32S/68S SUNISO SONOCO Japan Lubricant Oil and Equipment Subang Jaya, Selangor, Kuala Lumpur (KL), Malaysia. Supplier, Supplies, Manufacturer, Wholesaler | Culmi Air-Cond & Refrigeration Parts Supply Sdn Bhd

Type and Packing

SUNISO 3GS X 4L (6x4L can) REFRIGERANT OIL - SUNOCO JAPAN
SUNISO 4GS X 4L (6x4L can) REFRIGERANT OIL - SUNOCO JAPAN
SUNISO 5GS X 4L (6x4L can) REFRIGERANT OIL - SUNOCO JAPAN
SUNISO 3GS X 20L REFRIGERANT OIL - SUNOCO JAPAN
SUNISO 4GS X 20L REFRIGERANT OIL - SUNOCO JAPAN
SUNISO 5GS X 20L REFRIGERANT OIL - SUNOCO JAPAN
SUNISO SL32S X 4L (6x4L can) REFRIGERANT OIL - SUNOCO JAPAN
SUNISO SL68S X 4L (6x4L can) REFRIGERANT OIL - SUNOCO JAPAN
SUNISO SL100S X 4L (6x4L can) REFRIGERANT OIL - SUNOCO JAPAN * APPLICABLE FOR AUTOMOTIVE AIR-COND COMPRESSOR!
SUNISO SL170S X 4L (6x4L can) REFRIGERANT OIL - SUNOCO JAPAN
(Equivalent : RL170H / BSE170 [Bitzer])
SUNISO SL220S X 4L (6x4L can) REFRIGERANT OIL - SUNOCO JAPAN


SUNOCO SUNISO SL-S series are synthetic refrigeration oils designed specifically for using into refrigeration compressors for refrigerators, freezers, chillers and industrial refrigeration systems to be charged with hydrofluorocarbon (HFC) refrigerants.
  • SUNISO SL-S series have optimum miscibility and compatibility with HFC refrigerants such as R-134a and R404A.
     
  • SUNISO SL-S series are formulated by selected polyol ester basestocks and additives, featuring the following characteristics.

    Excellent Hydrolytic Stability
    Remarkable Thermal Stability
    Outstanding Lubricity
    High Electrical Insulating Property

     
  • SUNISO SL-S series are available in viscosity grade of ISO VG10, VG15, VG22 and VG32 for various refrigeration systems. 
     
  • For the after-market and service field, SUNISO SL-S series are available in 200L drums and 20L pail cans.
Typical Properties
  SUNISO
SL-10S
SUNISO
SL-15S
SUNISO
SL-22S
SUNISO
SL-32S
ISO Viscosity Classification ISO VG10 ISO VG15 ISO VG22 ISO VG32
 
Density 15°C g/cm3
0.928 0.940 0.951 0.956
Color ASTM  
L0.5 L0.5 L0.5 L0.5
Viscosity 40°C mm2/s
10.1 15.0 22.5 32.3
Viscosity 100°C mm2/s
2.50 3.22 4.14 5.14
Flash Point COC °C
182 196 212 230
Pour Point   °C
<-50 <-50 <-50 -22.5
Total Acid Number   mgKOH/g
0.01 0.01 0.01 0.01
Water Content   ppm
35 35 35 35
Miscibility Oil/ R-134a=1/4 °C
-52 -40 -30 -20
Resistivity 25°C Ωcm
5.0×1013 7.0×1013 4.0×1014 4.0×1014
 

Applications
Products Compressor Type Applications Refrigerants
Recipro Rotary Turbo Screw R-134 R-404A R-410A R-407C
SUNISO
SL-10S
      Refrigerator, Freezer,Chiller
SUNISO
SL-15S
      Refrigerator, Freezer,Chiller
SUNISO
SL-22S
      Refrigerator, Freezer,Chiller
SUNISO
SL-32S
Refrigerator, Freezer, Chiller, Dehumidifier    
*Suiso is a trademark of Sonneborn Inc.

 
 


SUNISO GS Oils are premium quality oils expressly designed for use as refrigeration compressor lubricants.
  • SUNISO GS Oils are miscible well with HCFC and CFC refrigerants such as R-22, R-502 and R-12 while featuring excellent stability and giving long trouble-free service life in the refrigeration systems using above refrigerants. In addition, SUNISO GS Oils also perform excellently with natural refrigerants such as R-717, R-600a and R-290.
  • SUNISO GS Oils are refined from specially selected naphthenic crude oils by special method assuring excellent lubricity and other properties.
  • SUNISO GS Oils are approved by all major air-conditioner, refrigerator, freezer, car air-conditioner manufacturers in the world.

Chemical Stability
To resist chemical reaction with the refrigerant or other material normally present in the system.
Thermal Stability
To eliminate excessive carbon deposits at compressor hot spots such as valves or discharge ports.
Low Wax Content
To prevent separation of flocculant wax from the oil-refrigerant mixture at the low temperature points in the system.
Low Pour Point
To prevent separated oil from congealing in refrigerant lines.
High Dielectric Strength
To insure good insulating properties. In hermetic units, the oil-refrigerant mixture serves as an insulator between the motor and the compressor body.
Proper Viscosity
Even when diluted with refrigerant so as to insure high film strength at elevated operating temperatures and while providing good fluidity under coldest operating conditions.
No Contamination
To prevent scarring of bearing surfaces, plugging of lines or oil ports and general deterioration.

  SUNISO GS Oils Conventional Oils
Sealed Tube Test
Terms : 175°C x 14days
Catalyst : Fe, Cu, Al
Refrigerant : R-12


SUNISO GS Oils feature excellent chemical stability.

 

Floc Test
3GS at -50°C
Refrigerant : R-12


SUNISO GS Oils don't precipitate wax deposit in an extremely low temperature section of the system such as valve or evaporator.

 

Pour Point
3GS at -40°C

SUNISO GS Oils are featuring outstanding fluidity at a low temperature condition resulting good oil returning in the refrigeration systems.

TYPICAL DATA
Property SUNISO 3GS SUNISO 4GS SUNISO 5GS
Density 15°C g/cm3
0.909 0.915 0.921
Color ASTM  
L0.5 L1.0 L1.0
Viscosity 40°C mm2/s
29.5 54.9 94.6
Viscosity 100°C mm2/s
4.31 5.97 7.78
Flash Point COC °C
178 188 208
Pour Point   °C
-40 -35 -27.5
Total Acid No.   mgKOH/g
0.01 0.01 0.01
Aniline Point   °C
75.4 79.8 80.4
Water   ppm
20 20 20
Floc Point   °C
-53 -46 -35
For the after-market and service field, Suniso GS Oils are available in 200L Drum and 20L Pail Can. Special package of Carton Case (4L Can x 6) is also available.

*Suniso is a trademark of Sonneborn Inc.

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version